Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate
Thruster TPV Grips - Chocolate

Thruster TPV Grips - Chocolate

SKU: 6702-0401
Sale price₱1,300.00
Sold out
FREE SHIPPING OVER $149 IN CONT. USA
Size:1"

Thruster uses the same padded diamond surface as our Torker grip, but features a tall inside flange and thick molded end cap for a retro MX look and feel.

 

Dimensions

Thruster TPV Grips - Chocolate

TECH SPECS
INSTALL TIPS
  • Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
  • Thick one-piece molded end design for durability
  • Tall inner flange protects your hands from discomfort against throttle and hand controls
  • Safety wire grooves for added security
  • Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle


Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1- or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips sufficient time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube. 

  • 5 stars: 40 (95%)
  • 4 stars: 2 (5%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
D
David V.

Look great! . Don’t need their whiskey throttle like they claim you do, installed on on stock Harley throttle easily.

G
Gary V.

Hare Krsna Bikers
I installed chocolate grips on renthall 7/8 bars, 2012 Bonneville se...they were a few mm short on the throttle side, so there's a large gap between the flange and throttle. I cut a hole in the ends of both grips to compensate, and it worked out for the left handle as I used my bar end to cover up the cut hole, and same with throttle side. Had the grips been longer, I would likely have not cut holes and accepted the grips as is, with their thick rubber ends and my bar ends not needed. Pictures will do better at showing.
Otherwise, the chocolate grips have given the bike a completed appearance, much like adding a missing tie to an expensive suit. I assume all the grip models are the same length?
Oh yes and then the bar end mirror needed a space for it, which took up the slack presented by the too short grip- but that side worked out not leaving any space. I'm thinking of filling the ugly gap some how or again attempting to slide the grip further closing the gap, then compensate on the other end with some kind of spacer?

M
Max K.

Amazing Grips Great Price Build Coming Along

J
James J.H.

Nice looking and feel better than my old grips.

C
Chaun O.

awesome

W
Will M.

A++ well made, nice feeling grips. Look cool too.

T
Troy L.

Very comfortable grips with a great look!

j
joseph l.

worked well,to bad had to buy two sets. heated grips are both one inc.

G
Greg W.

Absolutely love these grips. I have them on three different bikes and they are firm and have great grip.

A
Al

use them on my walking sticks
comfortable with good grip that won't slip even with wet hands or in the rain
cleans up easily
take care and have a nice day

J
James F.

Love the biltwell grips, I’ve ordered roughly 6 sets so far for 3 different bikes. They are easy to install, give a rad look and enhance comfortability by reducing hand vibration. Cheap enough to take a chance on love.

S
Sean L.

Perfect for my old Honda, easy to install as directed and crazy comfortable.

s
simon l.

very confortable and look good

D
Dan J.

These grips are awesome, love the way they look on my Honda Rebel.

M
Michael P.

Nice product. Had to buy two pairs because I’ve got heated grips. Install was easy, I had to make some mods to allow my bar end weights. Looking forward to riding after some other Spring maintenance.

B
Brandon K.

Awesome to have a set of moto-style grips on my Harley!

D
David A.

Grips fit perfect on 1" bars. They look good and feel good. My grips were so worn out and I didn't even realize it. Give it 24 hours for the WD to dry and you're off.

J
Jason L.

I fucking love them.

R
Robert J.

Great price, fast shipping. Been running this style of grips for years on everything from dynas to baggers.

J
Jeff M.

Love these. Replaced the handlebars on my Thruxton and decided to keep the same grips since they were great the first time.

B
Brandon B.

Favorite grips ever ordering 2 different colors soon!

A
Adam O.

Love these grips...I have them on my 2016 Scrambler and have now purchased for my 68 Bobber build. Tough grips long lasting, nice cushy feel and grip well.

C
Cody Y.

Couldn’t be happier. The look. The feel. Everything.

T
Tadd H.

I put these on my sb. They look cool as hell and feel great. I had big bulky grips before and these are like riding a bike! They'll look sweet with white walls when I get those on. I won't buy grips anywhere else! Shipping and everything was great.

M
Michael C.

quality parts, ordered the wrong size helmet and they helped me get it sent back and sent me the new helmet in a day. Thanks dogs love the brand

M
Michael Z.

Perfect fit on my new bars. Feel great and look even better!

J
Joseph T.

Nice ez fit look great

M
Marcus L.

Super easy install. Just WD40 these bad boys and slide on. So happy with how affordable they are.

M
Madison E.

My favorite grips of all time

F
Fred N.

I put these on my 2020 Triumph Bobber and man do they look killer! The feel is there, the grip is there and the color (ox blood). I’m glad I chose these because it gave my bike that custom detail I was looking for. Two thumbs up!!

D
Dan F.

Great product. Easy install, and a comfortable grip. Way better than the stock ones I had on my bars.

T
Taylor S.

Grips are perfect, will be ordering another set when these wear out and was stoked to find the sticker pack in the box as well! Keep it up!