Apes - Chrome
Apes - Chrome
Apes - Chrome
Apes - Chrome
Apes Handlebars 1" - Black
Apes Handlebars 1" - Black
Apes Handlebars 1" - Black
Apes - Chrome
Apes - Chrome
Apes - Chrome
Apes - Chrome
Apes - Chrome
Apes - Chrome
Apes Handlebars 1" - Black
Apes - Chrome
Apes - Chrome
Apes - Chrome
Apes - Chrome

Apes - Chrome

(6)
SKU: 6004-1057
$ 4,547.00
FREE SHIPPING OVER $149 IN CONT. USA
In stock
Type:TBW W/ INSERT
Dimensions

These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. These TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring. 

 

Dimensions

Apes - Chrome

(6)
TECH SPECS
FORM & FUNCTION
  • Seamless 0.120" (3mm) wall 4130 chromoly construction
  • CNC mandrel bends
  • Black electroplate and mirror chrome-plated finishes available
  • Available in TBW w/ insert for regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module
  • TBW w/ insert option has a 1in O.D. with a 20.9mm I.D.
  • Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Ape handlebars have a purpose beyond their classic chopper aesthetic, and that is to alter the bike's aerodynamic profile by raising the rider's hands level with or slightly above shoulder height. This increases the front profile going down the highway, which in turn reduces headwind pressure against the rider's chest at higher speeds. It's the same principle as a windshield, without the plastic appendage jutting off the forks.

NOTE: Your motorcycle's clutch cable, brake line and/or hand control wires may not be long enough to safely install this bar. Double-check these components before taking the stock bars off your motorcycle.

YOU MIGHT LIKE

Thruster TPV Grips - Black Thruster TPV Grips - Black
Thruster TPV Grips - Black
(42)
$ 379.00
Whiskey Throttle Tube 1" - Black Electroplate Whiskey Throttle Tube 1" - Black Electroplate
Whiskey Throttle Tube 1" - Black Electroplate
(25)
$ 947.00
Torker TPV Grips - Black Torker TPV Grips - Black
Torker TPV Grips - Black
(57)
$ 379.00
Recoil TPV Grips - Black Recoil TPV Grips - Black
Recoil TPV Grips - Black
(41)
$ 379.00
Kung Fu TPV Grips - Black Kung Fu TPV Grips - Black
Kung Fu TPV Grips - Black
(34)
$ 379.00
Cast Whiskey Throttle 1" Single - Polished Cast Whiskey Throttle 1" Single - Polished
Cast Whiskey Throttle 1" Single - Polished
(22)
$ 1,894.00
Murdock Pullback Risers 6" 8" 10" 12" - Black Electroplate Murdock Pullback Risers 6" 8" 10" 12" - Black Electroplate
Murdock Pullback Risers 6" 8" 10" 12" - Black Electroplate
(59)
From $ 5,495.00
Renegade TPV Grips - Black Renegade TPV Grips - Black
Renegade TPV Grips - Black
(20)
$ 379.00
Cast Whiskey Throttle 1" Single - Black Electroplate Cast Whiskey Throttle 1" Single - Black Electroplate
Cast Whiskey Throttle 1" Single - Black Electroplate
(22)
$ 1,894.00
Slimline Risers 1" - Polished Slimline Risers - Polished
Slimline Risers 1" - Polished
(22)
$ 2,842.00
Slimline Risers 1" - Black Slimline Risers - Black
Slimline Risers 1" - Black
(22)
$ 2,842.00
Cast Whiskey Throttle 1" Dual - Black Electroplate Cast Whiskey Throttle 1" Dual - Black Electroplate
Cast Whiskey Throttle 1" Dual - Black Electroplate
(13)
$ 1,894.00
4 Speed Vest - Black 4 Speed Vest - Black
4 Speed Vest - Black
(19)
$ 1,894.00
1" AlumiCore TBW Grips For H-D Bars With Hollow Tube End on Clutch Side - Black Electroplate 1" AlumiCore TBW Grips For H-D Bars With Hollow Tube End on Clutch Side - Black Electroplate
1" AlumiCore TBW Grips For H-D Bars With Hollow Tube End on Clutch Side - Black Electroplate
(27)
$ 2,842.00
Cast Whiskey Throttle 1" Dual - Polished Cast Whiskey Throttle 1" Dual - Polished
Cast Whiskey Throttle 1" Dual - Polished
(13)
$ 1,894.00
  • 5 stars: 5 (83%)
  • 4 stars: 1 (17%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
N
N B.

As usual, biltwell delivering quality parts. Bars feel great, perfect width and super comfortable pull back. Just right for cruisin

N B. review photo N B. review photo
C
Chris C.

The bars are great. Not much to say that isn’t already in the description. They’re a good height, not too low or too high. Running wires through them was a piece of cake! I’m happy with them!

My one critique/recommendation would be for Biltwell to start adding a knurled surface the clamp area of the bars. I’ve tried everything and am still having issues with them rolling on bumps etc. It’s less than ideal. The bars are perfectly smooth. I’ve torqued my top clamps to 30ft lbs (spec is 18-20ft lbs) and am still getting bits of movement. I also added some small pieces of gorilla tape to give the clamps something to grip on. With the gorilla tape and 30ft lbs I finally have a fairly secure handlebar, but I think a knurled surface would have done a whole lot better.

Chris C. review photo Chris C. review photo
M
Matt

Have a little over 10k with these bars on my 2003 Super Glide. I really like the ride height and the feel of the bars.

M
Michael J.

Very Good product, care and shipping of product and overall customer service!

w
will

i brag about these damn bars in forums all the time.PERFECT.these are the only apes i've seen that aren't wider than the trees. They have a nice angle that feels great too. buy 'em.

M
Matty

perfect bars on my nightster.. height is level with my shoulders.. and their not as wide as most "apes"