Engineered to deliver comfortable ergonomics and classic chopper style, Zed and his little brother Maynard are our take on Z-bars, a timeless chopper classic. We build every Biltwell bar with 4130 chromoly for strength, then electroplate them in satin black or polished chrome for looks that last.
Early chopper builders invented the 4-piece Z-bar to give their custom machines a cool look and a narrow profile. Our Zed and Maynard bars continue this tradition, with a rugged 4130 chromoly twist. Available in 7/8- and 1-inch sizes, Zed and his little brother Maynard are the narrowest models in our custom bar line. Their narrow width and comfortable backsweep make these bars perfect for compact stock bikes like H-D XLs and Yamaha XS650s, or on stripped-down bobbers and choppers. One-inch O.D. Zed and Maynard bars are available smooth for aftermarket hand controls, or dimpled/slotted to fit stock H-D hand controls. NOTE: because burrs can be present inside their welded joints, please DO NOT pull hand control wiring inside this model.
We’ve got a no hassle approach to exchanges and even cover shipping both ways in the USA. Dig in to the details for all returns and exchanges here.
Our checkout is verified and secured with bank level encryption so you never have to worry about your money.
Spend over $100 in our online store and your order ships for free within the USA. Orders placed before 2:00PM PST generally go out the same day so you get your stuff fast.
Tracker Handlebars 1" - Black
Keystone Handlebars 1" - Black
Frisco Handlebars 1" - Black
Macho Negro Seat Hinge - Black
Whiskey Throttle Tube 1" - Black
Chumps Handlebars 1" - Black
Slimline Risers - Polished
Chumps Handlebars 1" - Chrome
Slimline Risers - Black
Zed Handlebars 1" - Black
Cast Whiskey Throttle 1" Single - Polished
Tracker High Handlebars 1" - Black
Mushman Foot Pegs HD Classic - Black
Moto Handlebars 1" - Black
Tracker Handlebars 1" - Chrome
Select a row below to filter reviews.
Installed these bars on my 2018 XL1200CX (Roadster). Although the bike is designed to be a cafe racer the stock HD bar position was uncomfortable on my wrists given the leaned forward rider triangle. The Zed bars were a much more comfortable option for me personally (5'11 / 195) Great fit and finish. Stock HD throttle cables fit with ample slack, however; a new brake line will be required on these bars if just replacing stock bars.
I bought this for my Yamaha Roadstar Warrior to tighten up the width of my handlebars and for a more aggressive look. 11 Bolts off and on. Also fitted some Biltwell grips at the same time. Under an hour. No Cable adjustment needed (I might need to up my risers a couple inches). Now my RS Warrior has a Sport Bike type Handlebar, feels just like a crotch rocket. Took it back about 5 degrees and has a much better riding position in wind (I don't feel like a wind sock). Top notch quality and fit.
Great bars, fit with no issues on my Yamaha Bolt. Looks good with the narrow profile of the bike. A bit narrower than I expected but it looks and feels good.
I've just fitted these bars to a 2017 Sportster 48. First off, these bars are really good quality. Anyway regarding the fit, clutch cable - no problem, electrics - no problem, throttle cables - no problem Front brake line - just, or rather JUST. If these bars were 1/2" taller you would need to replace the brake line with a longer one. You will have to wrestle the reservoir and it's clamp into position but it will fit. You'll be left with around 1/2" slack in the line after fitting, slightly less on full left lock, but an acceptable amount. Don't forget to release the 'P' clamp on the rear right of the top yoke that guides the brake line to the union while wrestling ;) . Replacing the brake line while no big deal in itself, is a no no if you have ABS. This makes it a dealer job for which my dealership quoted Â£300 labour. American friends I'll let you do the maths on that!
installed these on my 2015 48 in about 30 min with no trouble.. Really happy!!! Great product