These Struts were developed for Sportsters but could be used on any bike that will accept 10” eye to eye struts with 1/2” bores for shock bolts/studs. They are finished with a super durable black electroplate finish. Built from burly DOM tubing, sleeved and TIG welded for strength.

You can install these yourself with a crescent wrench in about five minutes if you stop in the middle of the job to get another beer. Make sure you have enough clearance between your tire and fender/tailight wire, etc. Some Sportster models may require a little clearancing on the back side of the lower boss to make room for the axle nut and washer.